Home

Are Peerless Boilers reliable?

Dec 28, 2007 by petesquawk | Posted in Do It Yourself (DIY)

I am difficult to decide whether or not to get a Peerless Boiler. If you happen to own a Peerless Boiler, please inscribe down how long you have had the boiler if you happen to know.

Thanks for your aid.

I've had Peerless boilers in my widely known home for five years and for nine years in my last home. Never had a hard, but I was sure to have them serviced and cleaned once every year by an trained and reliable serviceman.

How reliable are Peerless, Wein-McLain or Slant-Fin boilers?

Dec 28, 2007 by petesquawk | Posted in Engineering

How principled are Peerless, Wein-McLain or Slant-Fin boilers? If you personally own one of these boilers, I also would be interested in qualified how long you've had the boiler.

I am trying to take what boiler is going to be the best buy over the long run. Thanks for your input.

Weil-McLain is a commercial yield that has a good reputation for quality. I am not familiar with the other two.

What can you tell me about the Peerless oil-fired, natural draft boilers? ?

Oct 28, 2008 by ctmom05 | Posted in Maintenance & Repairs

In terms of reliability, effect performance, and other pros and cons what can you tell me about Peerless oil fired, imbecile draft boilers?

We are replacing our heating system and this is the one that we are most likely to go with. Our dwelling-place is less than 1000 square feet, the furnace is old and we requirement to replace what we have with something more efficient.

i have a problem with my peerless boiler?

Oct 27, 2007 by gary d | Posted in Maintenance & Repairs

i have a peerless boiler that heats my take in. it's water base gas heating. i have 3 levels (basement, 1st floor, 2nd baffle). i have 2 problems with it. the first problem is that it's constantley shuts off. so i have to go down to the basement and fall on it up againg. the second problem is that when ever it's working, it makes a spread. any suggestions

The wheelman info is the proper place to start. The blare may be air in the system, which you can remove. If there are radiators they will have a schrader valve on or cheap the top. The air in the system will rise to the highest pints in the system - it will not flow back down, so you will needfulness to let it out. the valve operates just like a drain valve - just press the center arise. If they are baseboard radiators - about 6 inches tall, they appropriate have no valve. the simplest way to get the air out is to put a hose on a valve at the boiler, and induce to talk a halt water from it until you get no air. The water will be dark and will stain whatever you get it on, so be wary. Also the water in the boiler will likely be very hot unless the boiler has been off for several hours. Try to use a valve that is on the safety-valve side of the boiler, or use the boiler drain.

Our peerless boiler-model-61-04-stdg-sp started leaking water from the side left wall should I shut it down?

Dec 03, 2007 by aham300 | Posted in Maintenance & Repairs

You will requirement to eventually replace it however unless it is leaking enough open-handedly to cause the tank to run dry or heating element to overheat you can still run it until you can renew it. It will however make a mess as I am sure you are already aware.